Welcome to aurora.com! Log in or Sign up to interact with the aurora community.

OrdBot Hadron

Discussion in 'Reprapdiscount Products' started by Oyvind Amundsen, May 29, 2014.

  1. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    Started a thread abut the OrdBot Hadron. I plan to share my experiences and modifications in this thread.
    If you have modifications/upgrades that makes the OrdBot a better printer - share it here :)
     
  2. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    To protect the moving cables + get a clean look, I have used a flexible shower hose (removed the inner tube). The hose I found is 14mm.
    Have designed "flexi" mounts for the extruder carriage, X stepper mount, handle plate.
    Next is a mount to use on the heated bed.

    I plan to use the RRD FullGraphics LCD panel, so I have modified it so I can mount it on my OrdBot.

    Info about my Bulldog Extruder + Hexagon mount is in an other thread.

    I plan to share the STL files when I`m done.
     

    Attached Files:

  3. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway

    Attached Files:

  4. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    Flexi mount - Heated Bed V1
     

    Attached Files:

  5. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    The LCD panel on the ORD BOT
     

    Attached Files:

  6. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    Flexi tubes + display + endstops ready
     

    Attached Files:

  7. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
  8. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    My next projects:
    - Z-probe (servo + mechanical endstop)
    - A new more compact Bulldog + Hexagon mount
    - A new filament fan mount
    - Rumba mount
    - PSU mount
     
  9. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway

    Attached Files:

  10. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    The PSU mount is printed, and mounted on my ORD BOT.
     

    Attached Files:

  11. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    The PSU mount clip on to the MakerSlide wery tight, so I do not have to use screws.
     

    Attached Files:

  12. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    Have modified this mount from thingiverse:

    http://www.thingiverse.com/thing:349015

    So I can use it on OrdBot - I plan to make a new top.

    I may use some 10mm spacers, so I can hide some of the cables behind the case.
     

    Attached Files:

  13. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    Done printing and mounted on the OrdBot (Perfect fit) :)

    Have to find what fan to use, and design the case top.
     

    Attached Files:

  14. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    I`m going to make new flexi hose mounts that also acts as cable boxes to hide the cables + a more clean setup
     

    Attached Files:

  15. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    I plan to test it like this (I`ll make the top covers later).
    The Rumba case is mounted so it`s possible to hide cables behind it.
     

    Attached Files:

  16. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    First box/flexi mount printed - perfect fit :)
     

    Attached Files:

  17. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    Have designed my own Rumba case + finished the rest.

    I`ll share the files when I have done a test print.
     

    Attached Files:

  18. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    Printed the new wider Rumba OrdBot case.
     

    Attached Files:

  19. Oyvind Amundsen

    Oyvind Amundsen Member

    Joined:
    Nov 23, 2013
    Location:
    Norway
    the result
     

    Attached Files:

  20. Geoff Steer

    Geoff Steer Guest

    I'm in the process of sorting out the wiring for my Ord Hadron and this is just what I'm looking for.
    Now all I need is a working printer to make the parts ...
    Any images of how the Y axis attaches to the bed?
     

Share This Page