Welcome to aurora.com! Log in or Sign up to interact with the aurora community.

SD UPLOAD not working

Discussion in 'RUMBA' started by Grant, Apr 16, 2013.

  1. Grant

    Grant New Member

    Joined:
    Feb 13, 2013
    Location:
    South Africe
    im not able to upload to the sd card from Repetier-Host it hangs every time i want to send a file why is this please help thanks
     
  2. BubbleRep

    BubbleRep Administrator Staff Member

    Joined:
    Nov 11, 2012
    which sd card slot?
     
  3. Grant

    Grant New Member

    Joined:
    Feb 13, 2013
    Location:
    South Africe
    the standard card adaptor shipped with the kit it i took the "$99
    Rumba Board Basic kit" i start the upload and the comms stop and hangs the printer and the pc soft ware
     
  4. Grant

    Grant New Member

    Joined:
    Feb 13, 2013
    Location:
    South Africe
  5. BubbleRep

    BubbleRep Administrator Staff Member

    Joined:
    Nov 11, 2012
    you should have received a replacement for that yesterday?!

    about sd card, did you enable the sd card support in the firmware, did you try pronterface?
     
  6. Grant

    Grant New Member

    Joined:
    Feb 13, 2013
    Location:
    South Africe
    "" you should have received a replacement for that yesterday?! "" sorry not the correct person i dont need a replacement ..I have tryed Pronterface and same problem ... Open the sd card from the manager select new file to upload and it starts and about 1min later it stops comms and there is nothing i can do to get it working again to get it working ..turn of printer close software turn on printer open software but still no file on sdcard i print over usb of have to use an adaptor to copy the file
     
  7. BubbleRep

    BubbleRep Administrator Staff Member

    Joined:
    Nov 11, 2012
    that replacement statement was meant for your other post you refered too.

    Which os are you using and which firmware?
    BR
    BubbleRep
     
  8. Grant

    Grant New Member

    Joined:
    Feb 13, 2013
    Location:
    South Africe
    marlin and windows XP
     

Share This Page