Welcome to aurora.com! Log in or Sign up to interact with the aurora community.

TAURINO POWER open source files

Discussion in 'Reprapdiscount Open Source' started by RUMBA dancer, May 6, 2013.

Thread Status:
Not open for further replies.
  1. RUMBA dancer

    RUMBA dancer Administrator Staff Member

    Joined:
    May 6, 2013
    Attached you can find a zip archive which contains the source files (Altium Designer) of the TAURINO POWER board.

    A description of the board can be found in the reprap wiki here: http://reprap.org/wiki/Taurino#Taurino_Power

    The board was derived from the ARDUINO board which can be found here: http://arduino.cc/en/Main/ArduinoBoardMega2560

    To fit the needs of 3d printing better Taurino Power has an on board voltage regulator (DC-DC) which can handle much higher voltages (up to 35V) without any risk of damage to the board.
     

    Attached Files:

Thread Status:
Not open for further replies.

Share This Page